Well, our Team didn't make it to the WTB because one lacked to do anything and the other kind of had pc problems, so I didn't submit it as it wouldn't have been Team work. I have opened Photoshop again and working off from the last place I had left, I have wip images from where I left off and I'll up-date this tomorrow.

Original:
[URL="http://img97.imageshack.us/i/wtb10r1fordfocus2011.jpg/"][/URL]

Kit With Lines: Custom by Me


Kit With Lines (faded): Custom by Me


I have used a donor for the front bumper, but in no way would it fit. So I'll make it fit by the time I finishing brushing it.

==============================

I have an up-date now, it's quite a mess as of now, but I am getting the tones right.



Working on the front bumper now.

==============================

Working on the bumper as you can see;



==============================

Here is the next up-date. Working on few details here and there. You'll notice the difference. After this, I am aiming to get the first stage of brushing done - which is; the entire kit sorted. After that I want to begin stage two in my terms.



==============================

Here is another up-date. As you can see the side is now taking place. Im basing the reflection/shape/tone on a normal focus and this one. Reflections (when I come to them) I am dreading lol. This up-date has changed a lot, removed the front vent as its keek. Done more brush work to the bonnet/entire side/roof/bits of front bumper/splitter etc. You'll notice the changes.



==============================

Another quick up-date:



==============================

Well much bigger up-date here. Been working hard to get it into shape now. I have removed the side vents, they didn't make any sense, like stated (Thanks Phil). I then re-fixed the front bumper vent (Thanks Jack), added more details to the front bumper vents. Added FMIC, pipe and mesh. Brushed the side skirt and extended it a tad as it looked kack so small, but now I am fed up looking at this one so I'll probably change the side skirt again on the next up-date. Added the rear light in as I decided to get rid off that rear arch and just stick with the normal arch. As of now, in this up-date, you can also see I am working with the front arch (re-brushed). I have started "stage 2" brushing on the side, a lot more depth to show the details in the panels.



==============================

Here is another up-date, last one of tonight. From the last up-date I have; did more brush work to the side. Added the door handle again, brushed the new door line/bonnet line. Added the mirror back again, but only removed the led light from it. Added in the b pillars to the windows (still working on some touches for this). Added more highlights to the front bumper/rear arch and bonnet. Finished the front arch; I feel something more has to be done to the side. Still not decided the new design for the side skirt, but I'll maybe get some inspiration tomorrow for that. Also, I added another image, possible final colour change to go for in the end, only a suggestion though.



Possible colour change:


==============================

I'll up-date tomorrow.

From the last WIP, I have done the following;

Fixed the side windows and added the reflections, brushed more details on the front bumper (lip, side left vent, added mesh to the vent also), removed side skirt (going to work on a new design). As you can see atm, the front light is gone, I am working on a concept light of some sort providing it all goes to plan - I've just brushed the details off the back light and going to work on the bulbs etc now. Here is up-date no.10:



I'll up-date more later.

nice to see let me no was finishing it mate as when told you pc was fixed you was up for doin all the pics for fun

Looking ace man! I cant wait to see it finished!

If your going to get on like that and flare me, check Corsa-C before you start blaming; get your facts right before you state opinions. I had asked you for interior etc and failed to recieve it, you sent me it the day the WTB entries had closed. The other person I was flaming know who he is, so it wasn't directed at you.

Thanks for C+C so far, so keep them coming. And for you tomo, do some work on it, and send to me.

Looking good man, shame your team didn't pull together and get this one in. From where I see you taking the chop, I think you would have had a solid chance at progressing to the next round.

and i had sent interior and new lights for it, you then emailed me saying you hadnt rcvd it i resent them when i got your mail, but fcuk it missed chance so if liek you email to me suggetsed that we will do rest of cars and you teach me soem skills on way then hey yeah im up for it

Sure you re-sent me it again when the deadline had closed. But yeah, do interior again, mirrors, rear light, grille, and side skirt. I'll keep working on these body details and front lights I am doing atm. And yeah np, if you can get on msn it makes it easier for me to teach you along the way.

@Mark, Yeah still going to do all the rounds and teach my young friend Tom along the way. Think that's his name LOL

ok mate will get on it, ha names shaun btw not tom lol.

Well, sorry for long up-date. Had a non working computer, crappy graphics (couldn't focus on the details) and then had no internet for nearly a month. All back and running, so got laid into this yesterday. Since "WIP 10" image shown; I have done quite a lot of work.

I had shown a small image of the brushed headlights, well now the other side is finished too. I modified the rear light too, you'll see the difference if you compare. Started to do more in-depth work on the front bumper, added some brush details to enhance the overall look. I spent AGES looking for rims, and I wasn't satisfied.. However, I found some nice tyres, and fitted them with a red lip.. Just need to find a rims to put inside and finish the details off. You'll see below the direction I am heading now...

WIP 11:


I'll maybe do an up-date later.