sanded it all flat zo now its one piece , i will put clear red styrene sprue in a drill and make them the right diameter and shape to put in the holes as lenses

because the style is going more towards the vintage look like with the white walls and chrome steelies and i added a visor , i figured the rest did not need to be as clean anymore ..

so i started to make some roofrack rails , since i will put on a surfboard ,, just the first strips will develope further



drawn 3 lines just as a inspiration thing // could make indentated lines there maybe ..



added an edge to the bonnet



wich makes it look bad ... lol needs shaping just glued it on

i didnt feel like building lately , weather is great , and i cleaned my workshed , got everything tidy-ed up , greased my colomn drill ... and i have loads of nice things to build and do .. so ....

but i just did some work on the bronco .. not much but ...

i made like those indented lines on the hardtop / roof ..

i drawed it out , cut the lines with a knife and ruler , then sribed them with a steel pen , sawed them deeper and finally sanded the edges round
made them cross the panellined from the hardtop



the rear , i made the lines run into the edge of the roof





seen from the side you can see i glued a strip in the middle of the hood



like this , when the glue is really hard , i will sand the strip down a lot and get it some shape on the edges so it a slightly raised line in the center