well you have different sizes in rc , even real big ones

front wheels are on .. i need to finish up the chassis mods and paint some stuff , will post pics later

now these are stock wheel wells (inner wells) i only made the lip on the inside smaller but the wheels fot in there like this in stock form .. wheels and tryres are in tact nothing is shaved off ...

i know its a bit low and most would like it a bit higher but i just liked the slammed look like its on air and down on its belly ..



found some cool brake discs , painted them silver and washed the discs with blac , paited the calipers red so you see them better

rear wheels are done , body is filthy and full of fingerprints and dust on the pics , need to clean it

put on a p/e licence plate frame with the charge plate from the kit ..





now i need to add detail on the engine , hoses - battery - etc

well just about finished it , added the battery , hoses , brake booster (got piping under it into the reservoir)

en de zon scheen dus ...

hey all , starting on this revell ford bronco ..

Now i got this kit in a shoebox with the build description , it supposed to be a kit of the bronco with a trailer and powerboat , i only have the bronco and not the trailer and boat ..
the plastic has become yellow , like from age ?? i dont know the kit is from 1991 going from the all yellowed build description.
The kit is fairly simple to put together but not real bad in detail

what i got in a shoebox (got this from a guy who stopped with building due to health issues )



the grille is cool its already open .. the headlights suck they are one piece and no glass in the kit for those .. so maybe open them up and make reflectors and cust glass to put in would be cool



the body , i hate the shape of the wheel wells , now i cant really find good pictures of this kit or the boxart , i did find one other kit and those flares supposed to resemble / be rubber ?
anyway my plan is to cut open the wheel wells and get some cool wheels on it and make it a bit rough looking ..
i ven think changing the body like where the hardtop on the bed sits and make that whole with the body so its one piece could be cool ..not sure yet
the roof window will be closed up i dont like that really .. overal it needs to becomea bit smoother overall , bit custom



the tails are also a cast so i will make some taillight myself ..

for now cut out the wells , bottom doorline and front bumper pan





what came off . looks a bit like a bodykit haha



cut out the inner wells at the front .. i want to do some reaserch and maybe do it minitruck style ....

raised with big tyres is cool but getting the right tyres .. hmm hard i have nothing .. so went for the slammed minitruck style ....
flattened the sides ,took forever the styrene is soo tough .. used my files and then sanded .. reshaped the hinge bloks above and under the taillights where the spare tyre frame should go on







you can see how yellow the styrene has become .. nice as a sanding guideline



next job is flattening the roof window surround and closing the roof

Nice. Looking forward to seeing this build , as always