rim back is off

I found A new set of BBS and adjusted some settings to try and bring the paint out. Please if you are looking at this I need input. Thanks

I think the shadow is still wrong and weird. Just look at the shape of the front arch and "copy" it on the ground. Since the front is a bit high from the ground, the shadow should be very smooth in this surface. Anyway, add definition and shape to the reflections on the bodywork

Not sure Ta2man.

If the aim for the paint is a matte/satin look, then you should revert back to the previous WIP.

Areas for improvement:
- Hood needs darker shadows and brighter highlights. Try to make the bright and dark areas on the hood as bright/dark as the paint on the side. Doing that should make the paint on the hood "pop" a little more like the side does. Something like this:


- Shadow at the front still isn't correct. Needs to extend more rounded like the picture above.

- Central vent on the bumper needs to be shifted a bit to the left (see picture).

Yeh i was going for the satin look and others said refs looked blury. l will fix the vent and shadow and vent. I appreciate your advice. Thanks

Worked on some of those corrections. More comments more suggestions please.

Was hoping for some more feedback before this post but I understand peeps are busy!
Well had a design change on the color and decided to go with a Hunter green. I really like this version better. Also the Pro Street version that I have looks even better!

i agree that the green one looks way better but the refs are to strong or should i say to glossy for the bacground, the background is blured a bit so the refs should be a bit more softer not a lot but just a bit again i like this version better than previous

Thanks Ugra I thought so .

Finished; http://www.autemo.com/forums/?t=17672